Something you may want to learn about
Is the surface of the SPC wall panels flat or embossed?
A: The surface of it is deeply embossed, and the effect is as luxurious as real rough granite.
Can they be used outdoors?
A: Yes, that's not a problem. Spc wall panels are extruded at high temperatures and have good heat resistance. In addition, there is an ASA coating on the surface, which can well resist direct sunlight and is guaranteed not to fade for 10 years.
Can they withstand humidity and water?
A: Yes! Spc wall panels are ideal for installation in damp places such as bathrooms, showers and swimming pools without mold problems.
Can they be installed on any substrate?
A: It can be directly adhered to all types of surfaces such as: concrete, tiles, gypsum plaster, plywood, OSB.
How do I clean it?
A: The product can be easily cleaned with a general-purpose cleaner and cloth. We do not recommend the use of corrosive cleaning products such as chlorine, bleach, etc.
How can I order a sample?
A: Write to us via WhatsApp or email and we will have a dedicated person to contact you. We also recommend that you visit our factory and showroom to understand the products and make a proper evaluation.
INSTALLATION STEPS:
Prepare the wall: level, clean and degrease.
Measure and determine the vertical and horizontal.
Position and cut the panels to fit the dimensions of the wall.
When applying glue to the panels, remember to leave margins of approximately 0.5 cm from each edge. This will prevent the glue from oozing outwards.
Glue it to the wall. Align the panel and press.
Apply silicone to the wall, a few millimetres above the joint of the panel you just installed.
Connect the next panel in the same way.
Remove the protective film
